Casio AT-3 Manuallines page 2

This section explains how to record to the system track and how to record to tracks 01 through 16.
1. Press the C-5 (SONG SEQUENCER) button to enter the song sequencer mode.
2. Press the C-6 (RECORD) button.
3. Press Tone (R1-R12) and choice your favorite tone. Example "StereoGrand Piano " Press
button or use the dial to change your favorite tone or voices.
4. Steps to configure the beat:
 While holding down the R-13 (FUNCTION) button, press the C-17 ( MENU) button.
This will display a menu like the one shown below, with the
 Use the dial or R-14 (-,+) button to configure the beat setting of 2/4, 8/4, 2/8 etc.
 Use the R-17 (
(-,+) buttons to turn the metronome "off".
 Use the R-17 (
buttons to turn the precount "on".
 Press the R-15 (EXIT) button to exit the menu.
˅
) button to move the ● to "Metronome" and then use the R-14
˅
) button to move the ● to "Precount" and then use the R-14 ( -,+)
P a g e
● next to "Beat".
| 2
R-14 (-,+)