CITROEN C3 Picasso 2011 Owner's Handbook Manual page 150

CHANGING A FUSE
Procedure for replacing a failed fuse
with a new fuse to rectify a failure of the
corresponding function.
Access to the tools
The extraction tweezer and the spare
fuse storage compartment are installed
on the back of the dashboard fusebox
cover.
For access to them:
Open the glove box,
unclip the fuse access cover by pull-
ing on the side,
remove the cover completely,
11
remove the tweezer.
P R A C T I C A L I N F O R M A T I O N
Before changing a fuse, the cause of
the failure must be identifi ed and recti-
fi ed.
Identify the failed fuse by checking
the condition of its fi lament.
Good
Use the special tweezer to extract
the fuse from its housing.
Always replace the faulty fuse with a
fuse of the same rating.
Check that the number marked on
the fusebox, the rating marked on
the fuse and the following tables all
agree.
Installing electrical
accessories
Your vehicle's electrical sys-
tem is designed to operate with
standard or optional equipment.
Before
trical equipment or accesso-
ries on your vehicle, contact a
CITROËN dealer or a qualifi ed
workshop.
CITROËN will not accept respon-
sibility for the cost incurred in
repairing your vehicle or for recti-
fying malfunctions resulting from
Failed
the installation of accessories not
supplied and not recommended
by CITROËN and not installed in
accordance with its instructions,
in particular when the combined
consumption of all of the addition-
al equipment connected exceeds
10 milliamperes.
installing other elec-