GE RARWT Series Owner's Manual & Installation Instructions page 14

Hide thumbs Also See for RARWT Series:

Table of Contents

Available languages

Testing the Thermostat

Furnace Test

1. Toggle mode button until furnace mode is active. Furnace

mode screen is displayed.

2. Adjust set temperature so it is 5 degrees above room

temperature. Within a few seconds, the furnace should initiate

its startup procedure.

3. Adjust the set temperature so it is 2 degrees below the

room temperature and the heat should turn off. Note:

Depending on the model of furnace used, there may be a

delay in engaging and disengaging the furnace.

49-5000400 Rev. 2

Table of Contents

Show Quick Links

Chapters

Table of Contents

Do you have a question about the RARWT Series and is the answer not in the manual?

Rarmc series