Advertisement
Step 14
å
This unit attaches to the 427030.
å
Place the unit on top of the 427030 as shown.
å
NOTE: There are no pre-drilled holes in the 427030 for attaching
the HUTCH. You will need to drill 1/8" wide, 1" deep holes through
the open holes in the BRACKET CONNECTORS (81G).
å
Fasten the HUTCH to the unit you have drilled the holes into.
Use four SILVER 1" LARGE HEAD SCREWS (102S) through the
BRACKET CONNECTORS and into the unit.
Mark and drill 1/8" holes
through the holes in the
BRACKET CONNECTORS.
Electric drill with 1/8" bit
(ONLY in indicated step)
102S
SILVER 1" LARGE HEAD SCREW
(4 used in this step)
81G
Page 19
Advertisement
