Related Manuals for Teknik Canal Heights 5419232
Summary of Contents for Teknik Canal Heights 5419232
- Page 1 Teknik www.teknikoffice.co.uk Smart stand for the idiot box. Canal Heights TV Stand 5419232 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-24 Hammer Not actual size Français 25-28 Español 29-32 Skip the power trip. Safety 33-34 This time. Warranty WARNING Use of a TV that is too heavy or large is hazardous.
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT END (1) RIGHT FRONT PANEL (1) BACK BRACE (2)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. EXTENSION SETS SHOWN SEPARATED EXTENSION RAIL - 2 EXTENSION SLIDE - 2 HIDDEN CAM - 25 CAM SCREW - 25 SMALL CAM SMALL WOOD SMALL HIDDEN WOOD DOWEL - 40 CAM - 4...
- Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Insert thirteen CAM SCREWS (4) into the TOP (E). å (13 used) Page 5...
- Page 6 Step 2 Separate the EXTENSION SLIDES (2) from the å EXTENSION RAILS (1) as shown in the right enlarged diagram. Be prepared, the parts are greasy. Fasten the EXTENSION RAILS (1) to the UPRIGHTS (C å and D). Use six 1/2" PAN HEAD SCREWS (17). NOTE: Use the exact holes shown in the RAILS.
- Page 7 Step 3 Turn six CAM SCREWS (4) into the exact holes shown in å the REAR CORNERS (L and M) and BACK (H). Insert ten WOOD DOWELS (7) into the exact holes shown å in the REAR CORNERS (L and M) and BACK (H). (6 used) (10 used) 419232...
- Page 8 Step 4 Insert two HIDDEN CAMS (3) into the BACK (H). å Fasten the REAR CORNERS (L and M) to the BACK (H). å Tighten two HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the edges of the å BACK insert into the holes in the REAR CORNERS.
- Page 9 Step 5 Turn six CAM SCREWS (4) into the exact holes shown in the å FRONT PANELS (I and J) and FRONT CORNERS (K). Insert fourteen WOOD DOWELS (7) into the exact holes shown å in the FRONT PANELS (I and J) and FRONT CORNERS (K). (6 used) (14 used) Page 9...
- Page 10 Step 6 Insert two HIDDEN CAMS (3) into the FRONT PANELS (I and J). å Fasten the FRONT CORNERS (K) to the FRONT PANELS (I and J). å Tighten two HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the edges of the FRONT å...
- Page 11 Step 7 Insert four HIDDEN CAMS (3) into the ENDS (A and B) å and UPRIGHTS (C and D). Fasten the ENDS (A and B) and UPRIGHTS (C and D) to å the FRONT PANELS (I and J) and FRONT CORNERS (K). Tighten four HIDDEN CAMS.
- Page 12 Step 8 Insert four HIDDEN CAMS (3) into the ENDS (A and B) å and UPRIGHTS (C and D). Fasten the ENDS (A and B) and UPRIGHTS (C and D) to å the BACK (H) and REAR CORNERS (L and M). Tighten four HIDDEN CAMS.
- Page 13 Step 9 NOTE: You may need someone's help in this step. å Insert thirteen HIDDEN CAMS (3) into the ENDS (A and B), å UPRIGHTS (C and D), BACK (H), and FRONT PANELS (I and J). Fasten the ENDS (A and B), UPRIGHTS (C and D), BACK (H), å...
- Page 14 Step 10 Fasten the BOTTOM (F) to the ENDS (A and B), å UPRIGHTS (C and D), BACK (H), and FRONT PANELS (I and J). Use thirteen 1-1/2" FLAT HEAD SCREWS (12). NOTE: Be sure the WOOD DOWELS in the edges of å...
- Page 15 Step 11 Fasten the BRACES (P and R) to the LEG å ASSEMBLIES (N and O). Use sixteen 1/2" MACHINE SCREWS (16). 1/2" MACHINE SCREW (16 used in this step) These holes must be here. Surface with no holes Surface with no holes Page 15...
- Page 16 Step 12 Fasten the LEG ASSEMBLIES (N and O) and å BRACES (P) to the BOTTOM (F). Tighten ten 1-3/8" MACHINE SCREWS (13). 1-3/8" MACHINE SCREW (10 used in this step) Surface with no holes Surface with no holes Page 16...
- Page 17 Step 13 Carefully turn your unit over onto its front edges. å Fasten the BACK BRACES (Q) to the LEG ASSEMBLIES (N å and O). Use four 1/2" MACHINE SCREWS (16). 1/2" MACHINE SCREW (4 used in this step) Page 17...
- Page 18 Step 14 Fasten the SHELVES (G) to the LEG ASSEMBLIES (N å and O) and SHELF BRACES (R). Use ten 1-1/4" FLAT HEAD SCREWS (14). 1-1/4" FLAT HEAD SCREW (10 used in this step) Page 18...
- Page 19 Step 15 Turn four SMALL CAM SCREWS (6) into the exact holes å shown in the DRAWER FRONT (S). Page 19...
- Page 20 Step 16 Insert two SMALL WOOD DOWELS (8) into the DRAWER SIDES (U and V). å Insert four SMALL HIDDEN CAMS (5) into the DRAWER SIDES (U and V) and DRAWER BRACE (X). å Fasten the DRAWER SIDES (U and V) and DRAWER BRACE (X) to the DRAWER FRONT (S). Tighten four SMALL å...
- Page 21 Step 17 Fasten the DRAWER BACK (T) to the DRAWER SIDES (U å and V) and DRAWER BRACE (X). Use six 1-1/4" FLAT HEAD SCREWS (14). 1-1/4" FLAT HEAD SCREW (6 used in this step) Be sure the DRAWER BOTTOM inserts into the DRAWER BACK groove.
- Page 22 Step 18 Fasten the EXTENSION SLIDES (2) to the DRAWER å SIDES (U and V). Use six 1/2" PAN HEAD SCREWS (17). NOTE: Use the exact holes shown in the SLIDES. å Fasten the KNOB (9) to the DRAWER FRONT (S). Use å...
- Page 23 Step 19 Carefully stand your unit upright. å To insert the drawer into your unit, line up the EXTENSION SLIDES å on the drawer with the EXTENSION RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in, then it will slide in and out easier.
- Page 24 Step 20 Apply the WARNING LABEL (18) to the TOP (E). You should be able to read the label when the TV is removed from the å unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram. NOTE: This is a permanent label intended to last for the life of the product.
- Page 25 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on furniture. •...