Related Manuals for Teknik 5420034
Summary of Contents for Teknik 5420034
- Page 1 Teknik www.teknikoffice.co.uk Your holder for all things awesome. Industrial Style TV Stand Model 5420034 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Part Identifi cation Hardware Identifi cation Assembly Steps 5-10 WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. END (2) LONG SHELF (1) SHORT SHELF (1)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. 1-3/16" ALLEN SCREW - 18 1/2" ALLEN SCREW - 12 WARNING LABEL - 1 TIE PLATE - 2 (for single unit) 22,68 22,68 (Refer to the last step for proper location and application) WARNING LABEL - 1...
- Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. NOTE: Do not completely tighten the SCREWS at this time. å Fasten the ENDS (A) to the BRACES (E). Tighten twelve 1/2" å...
- Page 6 Step Step 2 Slide the SHELVES (C and D) through the openings in å the ENDS (A). Fasten the SHELVES (C and D) to the ENDS (A) and å BRACES (E). Tighten twelve 1-3/16" ALLEN SCREWS (1) using the ALLEN WRENCH (6). Completely tighten all of the SCREWS.
- Page 7 Step Step 3 Fasten the LONG SHELF (B) to the ENDS (A) and å BRACE (E). Tighten six 1-3/16" ALLEN SCREWS (1) using the ALLEN WRENCH (6). Carefully stand your unit upright. å 1-3/16" ALLEN SCREW (6 used in this step) Page 7...
- Page 8 Step Step 4 NOTE: You can fasten two of the 420034 units side by side. å NOTE: If not fastening two units, go to Step 6. å If fastening two units together, remove two SCREWS from å one end of the LONG SHELF (B) and two SCREWS from the same end of the SHORT SHELF (C).
- Page 9 Step 5 Fasten two units together using four TIE PLATES (3). å Tighten eight 1-3/16" ALLEN SCREWS (1) (removed in Step 4) through the å TIE PLATES (3), through the ENDS (A), and into the LONG SHELVES (B) and SHORT SHELVES (C) using the ALLEN WRENCH (6). Page 9...
- Page 10 Step 6 Apply the WARNING LABEL (4) to the top of the single unit and the WARNING LABEL (5) to one of the two units if å fastened together. You should be able to read the label when the TV is removed from the unit. When the TV is in place, it should hide the label.
- Page 11 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following safety information. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.