Recording Analog Sound - Sony PCM-D50 Operating Instructions Manual

Recording analog sound

This section explains how to record analog
INPUT switch
sound signals from the line output of an
external device or by using the built-in or
Volume dial
external microphones.
/
MENU button
Recording using the built-in microphones

jack This sub-section explains how to record
sound sources in the built-in memory with
LINE IN (OPT)
the built-in microphones.
jack
To change sampling frequency, quantifying
REC LEVEL dial
bit number, or the memory drive for a
recording, go to the menu display (page 40).
 FF/ button
The default sampling frequency and
quantifying bit number are "44.10 kHz
 PAUSE button/
indicator
16 bit."
 REC button/
1
indicator
 PLAY/ENTER
button
 STOP button
2
FR/ button

3
Position the recorder and the built-in
microphones referring to "Preparation
before recording" (page 21).
Set the INPUT switch to the ""
(microphones) position.
Press the /MENU button.
The screen used to select a folder is
displayed.
Currently selected folder
Continued on the next page
23