Advertisement
b. Driving mode: HUD display Instantaneous fuel consumption of
100Miles
c. Finish driving: HUD display is average fuel consumption of 100Miles,
when turn o the car, HUD will auto turn o in 10s. Under the
condition with power,vertical press the wave button 5 seconds to
enter into menu option, show press in 11 times to nd menu 11, the
default value is 20 (means the emission is 2.0L), up or down the wave
button to increase or decrease the value according to the di erence
with your car emission until it shows correct.Vertical press in 5
seconds to save and exit. Or nd menu 2 , the parameter shows 100,
up or down to adjust.
8. Over speed alarm
HUD default over speed alarm value is 150,it can be adjusted. Under the
condition with power, vertical press in the wave button 5 seconds to
enter into menu option, short press 5 time to menu 5, parameter
150, here 150 means over when driving speed reach 150, hud will give
over speed alarm,up or down the wave button to increase or decrease
the value. Vertical press in 5 seconds to save after adjustment.
9. How can see the average fuel consumption of 100Miles?
When car turn o , HUD display is average fuel consumption of
100Miles.
10. HUD cannot be automatically power on
Vertical press in 5 seconds to enter into menu setting, short press 12
times to menu 12, the default value is 0, up or down to adjust the
default value to 12.8 V, vertical press in 5 seconds to save and exit.
11. HUD cannot be automatically power o in cars with Start Stop
function
Vertical short press the wave button 5 seconds to enter into menu
setting, vertical short press 12 times to menu 12, the default
parameter is 0, up or down the wave button to adjust the default
value to 13.2V
12. When HUD power o , it re-start again
Vertical press in 5 seconds to enter into menu setting, short press 12
times to menu 12, the default parameter is 0, up or down change it to
13. 8V, vertical press in 5 seconds to save and exit.
8
www.PyleUSA.com
Advertisement
