Advertisement
2. HUD only shows the car voltage and be automatic power o after 30
second when it under the condition with electricity while driving.
Reason: HUD just available for cars with OBD2 agreement and EU-OBD
agreementEuropean region: after 03 years, Other region:after 07 years)
HUD Products donnot support JOBD and OBDI and recommended test
for another car.
3. See not clearly when HUD under the sunlight.
Check whether the HUD host surface protective lm is torn,and please
stick the re ection lm in the gift box corresponding on the winscreen.
Or vertical press in 5 seconds to enter into menu setting when HUD is
power on, short press 7 times to 7 menu 7, adjust the parameter to 2,
vertical press in 5 seconds to save.
4. Wrong operation lead to crashes. Or inaccurate datas
Do a reset setting.
5. Inaccurate Speed
a. First check the speed unit is correct or not, the speed unit including
KM/H and MPH, short press in the wave button to switch between
KM/H and MPH
b. When HUD is power on, vertical press the wave button 5 seconds to
enter into the menu options, here menu option shows 0, parameter
shows 107, up or down the wave button to increase or decrease the
value according to the di erence until it shows correct one. After
adjustment, vertical press in 5 seconds to save it.
6. Inaccurate RPM
When HUD is power on,vertical press the wave button 5 seconds to
enter into the menu 1, parameter shows 117, up or down the wave
button to increase or decrease the value to 100. After adjustment,
vertical press in 5 seconds to save it.
7. Inaccurate fuel consumption
The unit for fuel consumption is L/100Miles, HUD display is the single
driving fuel consumption, while car display is Integrated average
driving fuel consumption, so it is normal if there are di erence.
HUD display three kinds of fuel consumption
a. Idle mode: HUD display Instantaneous fuel consumption per hour
(L/H), it means HUD can gure out how much oil the car will
consumed after start engine in one hour.
www.PyleUSA.com
7
Advertisement
