Download
Share
Print this page
Pyle PLVWR70IR Owner's Manual
  1. Manuals
  2. Brands
  3. Pyle Manuals
  4. Monitor
  5. PLVWR70IR
  6. Owner's manual
Pyle PLVWR70IR Owner's Manual

Pyle PLVWR70IR Owner's Manual

Flip down tft monitor
Hide thumbs

Advertisement

Quick Links

Download this manual
PLVWR70IR
OWNER'S MANUAL
FLIP DOWN TFT MONITOR

Advertisement

loading

Related Manuals for Pyle PLVWR70IR

Summary of Contents for Pyle PLVWR70IR

  • Page 1 PLVWR70IR OWNER’S MANUAL FLIP DOWN TFT MONITOR...

  • Page 2: Installation

    INSTALLATION Desk-top Installation 1. Determine the mounting location and drill four mounting holes. 2. Attach the bracket to the holes with the tapping screws (M4x10). 3. Let the two levers aim at the fixing holes on the bottom of the base to fix the display unit.
  • Page 3 INSTALLATION Ceiling-on Installation Bracket Mounting Bolts (M3x6) 1. Determine the mounting location and drill four mounting holes (see Fig.2). 2. Attach the bracket to the holes with the tapping screws (M4x10). 3. Let the two levers aim at the fixing holes to fix the display unit. 4.

  • Page 4: Replacing The Car Dome Lamp

    REPLACING THE CAR DOME LAMP Follow the directions show below for a new lamp changing. 1. Position light switch to “ 2. Push back the lamp cover and open it. (Refer to the following figure) 3. Remove and discard the old lamp. 4.

  • Page 5: Control & Function Keys

    CONTROL & FUNCTION KEYS 15 16 7” INCH TFT COLOR MONITOR...
  • Page 6 MONITOR 1. & 2. (POWER) and POWER INDICATOR LIGHT When the unit is provided DC 12V power, press POWER button (1) to turn on the unit. And then the power indicator light (2) will be illuminated red. Press it again to turn it off. CAR DOME LAMP The two car dome lamps (3) will be on in some needed situations.
  • Page 7 13. PUSH (Monitor Release Button) Opening the Monitor Press the PUSH button (13) to eject the screen display from the base at a little angle. Then you can easily turn the display upward or downward for good viewing. The monitor also can be adjusted through 30 degree both left and right from the central viewing position Closing the Monitor Return the monitor to the central viewing position.
  • Page 8 OWNER’S MANUAL INFRARED HEADPHONE...
  • Page 9 This infrared headphone is supplied with the main unit that has the infrared transmitting function. The user can put on the infrared headphone within proper range to hear the sound signal emitting from the infrared transmitting window of the main unit. Operation for the headphone batteries Two Size AA (1.5V) batteries are required to operate the headphones.
  • Page 10 Removing the headphone batteries: To remove the batteries, open the battery lid as described above and pull the battery out of the battery compartment by pushing the battery towards the spring until the plus pole is released and slides out. ATTENTION! Never leave batteries inside the headphones for very long periods of time to prevent any damage to the headphones from leaking batteries.
  • Page 11 Listening to a program When the main unit is working, it will automatically transmit the audio signal, and then you can use the infrared headphone to listen to a program. 1. Set the volume control of the headphone to minimum then switch on the headphone. And then put on it.
  • Page 12 www.pyleaudio.com 88-T1342-05...