Recharging The Battery; Checking The Battery Charge Level; Starting Up; Operation - Parkside RAPIDFIRE Translation Of The Original Instructions

Hide thumbs Also See for RAPIDFIRE:
Table of Contents

Advertisement

Available languages

Available languages

Only use the original charger from
the package to charge the battery.
The device may only be powered
with SELV (Safety Extra Low Vol-
tage) as marked on the device.
Charge the battery before the first
time of use.
Always take heed of the applicable
safety instructions as well as the en-
vironmental protection regulations
and information.
The warranty excludes all defects
caused by improper handling.

Recharging the battery

1. Connect the charger plug to the
charging socket (
vice.
2. Plug the battery charger (
into a mains outlet.
3. When the battery is fully re-
charged unplug the battery
charger (
Red LED lights up
Green LEDs light up
Checking the battery charge
level
The battery's charge level is indicated by
the charge state indicator (
The state of charge of the battery is displa-
yed by illuminating the appropriate LED
lights. In order to activate the display, the
on/off switch (
9) must be pressed.
Green LED lights up
Battery fully charged
6) of the de-
11)
11) from the mains.
Battery charging
Battery fully
charged
5).
Red LED lights up
Battery needs to be charged

Starting up

Before the starting up must
the transport safety (
removed.
Open the transport safety (
ve the transport safety of the bit holder
(
3).

Operation

1. Direction switch

You can toggle between right and left ro-
tation by pushing the direction of rotation
switch (
8).
If you move the direction switch (
the middle position, the device is secured
against being switched on.
The direction changed may
only be performed in stand-
still mode!
2. Bit selection from the
bit changeable drum
Push the slide of the interchangeable cord-
less screwdriver (
B
Turn the bit changeable drum to the left or
right until the desired bit is located on top
and is in line with the bit holder (
bit changeable drum engages audibly.
Push the slide of the interchangeable cord-
less screwdriver (
B
GB
IE
1)
1) and remo-
8) to
4) forward.
3). The
4) to the back.
NI
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

270830

Table of Contents