Download Print this page
Moen 4792 Quick Start Manual

Moen 4792 Quick Start Manual

Two-handle roman tub valve with dura-grip mounting system

Advertisement

Quick Links

PLEASE CONTACT MOEN FIRST
For Installation Help, Missing or Replacement Parts
(USA)
1-800-BUY-MOEN (1-800-289-6636)
Mon - Fri 8:00 AM to 7:00 PM, Eastern
Sat. 9:00 AM to 3:00 PM Eastern
WWW.MOEN.COM
(Canada)
1-800-465-6130
Mon - Fri 7:30 AM to 7:00 PM, Eastern
WWW.MOEN.CA
POR FAVOR, CONTÁCTESE PRIMERO CON MOEN
Para obtener ayuda de instalación, piezas faltantes o de
recambio
011 52 (800) 718-4345
Lunes a viernes de 8:00 a 20:00 hs.
(Costa Este)
Sáb. 8:00 a 18:30 hs. (Costa Este)
WWW.MOEN.COM.MX
VEUILLEZ D'ABORD CONTACTER MOEN
En cas de problèmes avec l'installation, ou pour obtenir
toute pièce manquante ou de rechange
1-800-465-6130
Du lundi au vendredi :
de 7 h 30 à 19 h, HE
WWW.MOEN.CA
HERRAMIENTAS
HELPFUL TOOLS
ÚTILES
For safety and ease of
faucet replacement, Moen
Para que el cambio de la
recommends the use of
llave sea fácil y seguro,
these helpful tools.
Moen le recomienda usar
estas útiles herramientas.
Size/Tamaño/Taille
1 1 /4"
(32 mm)
TWO-HANDLE ROMAN TUB VALVE WITH
DURA-GRIP™ MOUNTING SYSTEM
MODEL 4792
VÁLVULA PARA TINA ROMANA DE DOS
MANERALES CON SISTEMA DE MONTAJE DURA-GRIP™
MODELO 4792
SOUPAPE DE BAIGNOIRE ROMAINE À DEUX POIGNÉES
AVEC SYSTÈME DE MONTAGE DURA-GRIP
MODÈLE 4792
OUTILS UTILES
Par mesure de sécurité et
pour faciliter l'installation,
Moen suggère l'utilisation
des outils suivants.
or
o
ou
Sealant
Sellador
Mastic
Image is for Reference only
(Style varies by model)
La imagen es sólo como referencia
(El estilo varía por el modelo)
L'illustration n' e st offerte qu'à titre indicatif seulement
(Le style varie selon le modèle)
Record Purchased Model Number:
Registre el Número de Modelo adquirido:
Inscrire le numéro du modèle acheté :
_______________________
(Save instruction sheet for future reference)
(Guarde la hoja de instrucciones para futura referencia)
(Conserver ces directives pour consultation ultérieure)
Register Online:
Regístrese en línea:
S'enregistrer en ligne :
www.moen.com/product-registration
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET:
Always turn water supply OFF before removing existing faucet or disassembling the valve.
Open faucet handle to relieve water pressure and ensure that complete water shut-off has
been accomplished.
PRECAUCIÓN — CONSEJOS PARA CAMBIAR LA LLAVE MEZCLADORA:
Siempre CIERRE la toma de agua antes de quitar la llave existente o desmontar la válvula.
Abra la llave para liberar la presión, y asegúrese de que esté bien cerrada el agua.
ATTENTION — SUGGESTIONS POUR ENLEVER L'ANCIEN ROBINET:
Toujours couper l'alimentation en eau avant d' e nlever ou de démonter le robinet. Ouvrir le
robinet pour libérer la pression d' e au et pour s'assurer que l'alimentation en eau a bien été coupée.
INS2090C - 5/17
MC

Advertisement

loading

Summary of Contents for Moen 4792

  • Page 1 (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.CA POR FAVOR, CONTÁCTESE PRIMERO CON MOEN Para obtener ayuda de instalación, piezas faltantes o de recambio 011 52 (800) 718-4345 Lunes a viernes de 8:00 a 20:00 hs.
  • Page 2 Parts List Max. rough deck thickness 3-3/8” (85mm) A. Protective Cap (x2) F. Nut (x3) J. Adjustable Spout Espesor máx. aproximado de cubierta 3-3/8” (85mm) B. Test Plug G. Valve Body, Hot Shank Tool C. Protective Tube H. Valve Body, Cold K.
  • Page 3 Unfinished Deck Unfinished Deck Unfinished Deck Cubierta sin terminar Cubierta sin terminar Cubierta sin terminar Plate-forme non finie Plate-forme non finie Plate-forme non finie 1/8” (3 mm) above planned nished deck 1/8” (3 mm) sobre la cubierta terminada prevista Center Shank 3 mm (1/8 po) au-dessus de la Tubo roscado central plateforme nie prévue...
  • Page 4 INS2090C - 5/17 Option for thick deck/ CAUTION / PRECAUCIÓN / Opción para cubierta gruesa/ Option pour plateforme épaisse AVERTISSEMENT : 1-3/4” 1-3/4” MAX. MAX. 1-1/4” 1-1/4” MIN. MIN. 1. Internal Shank Nut must be tight and Wire Clip installed before pressurizing.
  • Page 5 INS2090C - 5/17 x2 x2 Place protective tube (C) over center shank assembly Solder all connections, then check for leaks. (I) and protective caps (A) over valves (G & H). Install Suelde todas las conexiones, y verifique si hay fugas. test plug (B).
  • Page 6 Moen no se hace tampoco ou le consommateur. Moen décline toute nor for any indirect, incidental or consequential responsable por los gastos de mano de obra ni por responsabilité...