NPL-4/5/RM-104
System Module and User Interface
General description
Operation modes
•
Shutdown
-MagIC is set to stand-by mode
-Logic voltage VIO is always on
Analog voltage supply is normally off, but other functions can switch voltage on
•
Active compass function
-External power supply is on
-MagIC is set to active mode
-System clock is activated
•
Production test mode
-As active mode but also offset strap current is activated
Compass function main features
Compass display menu
Compass function is controlled via UI SW menu structures. When compass display menu
is selected, it starts compass function.
Compass display results
Compass azimuth result is displayed with heading angle with numerical mode and with
(compass rose) pointer. Measurement is always continuous, only user action can stop
actions.
Other functionality during active compass function:
•
Minimal TX RF
•
No charging
•
Keyboard lights always on (also during calibration)
Copyright © 2005 Nokia Corporation. All rights reserved.
Page 58
-Location update via network
Nokia Customer Care
Issue 2 05/05