SAFETY Read all instructions and warnings before installing or operating This Pentair® Everpure® Oxidice system must be installed by a this product - Call 805-549-9724 for additional free copies of this licensed professional in accordance with all applicable codes and manual.
THEORY OF OPERATION SPECIFICATIONS Pentair® Everpure® Oxidice is a disinfection system that treats • System (Model/Part No.) the ice machine's water supply using dissolved ozone. It supports CD385 the reduction of the growth of bacteria, molds, yeast, and other • Ozone Output contaminants by disinfecting the air, water and surfaces within the 150 mg/hr @ 2.0 SCFH on ambient air...
INSTALLATION PROCEDURES Clean Ice Maker Clean your ice maker according to industry standards. The Pentair® Everpure® Oxidice is designed to keep a clean ice maker from becoming dirty. It will sterilize a dirty ice maker, but it may still appear dirty.
Page 5
TYPICAL INSTALLATION - FIGURE 2 9/16" Hole for Grommet Sump Water Line Oxidice • No more than 10 ft from the ice machine • Above sump water line • Do not use an extension cord Pentair® Everpure® Oxidice Installation and Operation Guide • 5...
OPERATING INSTRUCTIONS TROUBLESHOOTING • Once installed, the Pentair® Everpure® Oxidice system is ready Light Does Not Come On to use. Press the mode select button to cycle through different 1. Verify the system has power. flow profiles. 2. Push the mode select button to see if the unit will cycle through •...
APPENDIX A - SPECIFICATIONS Pentair® Everpure® Oxidice Installation and Operation Guide • 7...
Page 8
APPENDIX A - SPECIFICATIONS Ozone Generator Power Supply Ozone Cell Ozone Outlet Air Compressor Control Board Power Cord 8 • Pentair® Everpure® Oxidice Installation and Operation Guide...