Page 3
DESCRIPTION INSTALLATION Disconnect all power from the system. The Pentek VFD-WS Pump Shut Down Moisture Sensor is designed to shut off your Pentek IntelliDrive if water is detected. Connect the Moisture Sensor to the VFD (Figure 4): When water touches the two detection points on the bottom of I1+ (left) = Green wire ...
Page 4
Fx: 888.606.5484 All indicated Pentair trademarks and logos are property of Pentair . Third party registered and unregistered trademarks and logos are the property of their respective owners . Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.