Reminder Messages - Canadian Spa BP Series Owner's Manual

Reminder Messages

General maintenance helps.
The display of Reminder Messages can be suppressed by using the PREF Menu.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely, or there may be a limited
number of reminders on a specific model.
The frequency of each reminder (e.g. 7 days) can be specified by the Manufacturer.
Press a Temperature button to reset a displayed reminder message.
Appears on a regular schedule, e.g. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Appears on a regular schedule, e.g. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Appears on a regular schedule, e.g. every 30 days.
Clean the filter media as instructed by the manufacturer. See HOLD on page 9.
Appears on a regular schedule, e.g. every 30 days.
Residual Current Device (RCD) is an important safety device and must be
tested on a regular basis to verify its reliability.
Every user should be trained to safely test the RCD associated with the hot tub installation.
A RCD will have a TEST and RESET button on it that allows a user to verify proper function.
Warning:
If freezing conditions exist, a RCD should be reset immediately or spa damage could result.
The end user should always trained to test and reset the RCD on a regular basis.
O K A N A G A N / S A S K A T O O N / G A N D E R / M U S K O K A S P A S
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
(23)