Advertisement
Quick Links
Advertisement
Related Manuals for Canadian Spa GS Series
Summary of Contents for Canadian Spa GS Series
- Page 1 O K A N A G A N / S A S K A T O O N S P A S Patio Spas Owners Manual GS Series Le manuel du propriétaire GS Series Bedienungsanleitung GS Series Okanagan Saskatoon For Service Support please contact us anytime: support.canadianspacompany.com...
- Page 2 O K A N A G A N / S A S K A T O O N S P A S SAFETY INFORMATION - Europe (50Hz) IMPORTANT SAFETY INSTRUCTIONS 8. AUDIO/VIDEO EQUIPMENT WARNINGS (Optional equipment based on model) When installing and using this electrical equipment be sure to follow these basic safety CAUTION: Risk of Electrical Shock.
- Page 3 Delivering your Canadian Spa Local Regulations There may be certain restrictions and/or requirements that are particular to your locality. If in doubt, check with your local Choose your location council.
- Page 4 O K A N A G A N / S A S K A T O O N S P A S Pre-Delivery Information Plug & Play Hot Tub OPTION 3 Delivery from warehouse and delivered to customer and moved Before delivery of Acrylic Plug &...
-
Page 5: Filling Up Your Spa
O K A N A G A N / S A S K A T O O N S P A S Filling up your Spa IMPORTANT: Before filling the spa, it is important to read and understand the water chemistry section of this manual. Do not proceed until the water chemistry section is understood and the source water is tested. - Page 6 O K A N A G A N / S A S K A T O O N S P A S Chemical Guide FREE Water Test App Chlorine Granules - Disinfection To protect your health, ensure that your spa water is disinfected thoroughly on a regular basis.
-
Page 7: Troubleshooting Guide
To prevent limescale deposits, always use Scale Control after refilling. Test strips Helps to keep your spa Canadian Spa 3 Way Test strips to check the levels of Chlorine, PH and Total clean and Alkalinity. Simple and easy to use. Ensure achieve your spa is always safe to use. - Page 8 O K A N A G A N / S A S K A T O O N S P A S MVP260 Control Reference Card Initial Start-up When your spa is first actuated, it will go into Priming mode, indicated by “ .” Please see the M-7 Installation Instruction Manual for complete instructions on Power-up and Pump Priming.
-
Page 9: Diagnostic Messages
O K A N A G A N / S A S K A T O O N S P A S Diagnostic Messages Message Meaning: Action Required: No message on display. The control panel will be disabled until power returns. Spa Power has been cut off to the spa. - Page 10 O K A N A G A N / S A S K A T O O N S P A S (10)
- Page 11 O K A N A G A N / S A S K A T O O N S P A S Power Up Display Sequence Any time you change a DIP Switch, other than A1, you must reset Persistent Memory for your new DIP Switch Settings Upon power up, you should see the following on the display: changes to take effect.
-
Page 12: Limited Warranty
Warranty. In the event Canadian Spa Co. deems necessary the removal of the spa shall Canadian Spa Co. be liable, for any reason or cause, in excess of the amount to a place of repair or that the spa must be replaced, any and all costs of the spa paid for the product.
Need help?
Do you have a question about the GS Series and is the answer not in the manual?
Questions and answers