Bradley S19-210SS Installation

Pedestal-mounted stainless steel eyewash with foot pedal

215-604 Rev. U; EN 06-532G

Page 1 of 5

6/21/07

S19-210SS

Pedestal-Mounted Stainless

Steel Eyewash with Foot Pedal

Table of Contents

Pre-Installation Information . . . . . . . . . . . . . . .2

Installation Instructions . . . . . . . . . . . . . . . . . .3

Assembly Of Components . . . . . . . . . . . . . . . .4

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

P.O. Box 309, Menomonee Falls, WI USA 53052-0309

PHONE 1-800-BRADLEY FAX (262) 251-5817

http://www.bradleycorp.com

Table of Contents

Need help?

Do you have a question about the S19-210SS and is the answer not in the manual?

Page 1 Parts List ......5 215-604 Rev. U; EN 06-532G P.O. Box 309, Menomonee Falls, WI USA 53052-0309 © 2007 Bradley Corporation PHONE 1-800-BRADLEY FAX (262) 251-5817 Page 1 of 5 6/21/07 http://www.bradleycorp.com...
Page 2 114-051 For questions regarding the operation or installation of this product, visit www.bradleycorp.com or call 1-800-BRADLEY. Product warranties may also be found under ”Product Information” on our web site at www.bradleycorp.com. 6/21/07 Bradley Corporation • 215-604 Rev. U; EN 06-532G...
Page 3 2. Connect the drain piping (supplied by installer) to the 1-1/4" IPS drain outlet on the eyewash. 3. Mount the safety sign to the wall using sign-mounting hardware (supplied by installer). 4. Open the water supply lines. Test for leaks and adequate water flow. Bradley Corporation • 215-604 Rev. U; EN 06-532G 6/21/07...
Page 4 THIS END Date Signed Date Signed Datum Unterschrift Date Signed Date Signe Date Signed 1/2" IPS SUPPLY INLET 1-1/4" IPS DRAIN OUTLET Figure 2 NOTE: Items 4.1–4.12 come preassembled as Item 4. 6/21/07 Bradley Corporation • 215-604 Rev. U; EN 06-532G...
Page 5 Quad Ring 114-051 Safety Sign 4.11 S57-148 Spray Ring Assembly 204-421 Emergency Tag 4.12 110-209 Acorn Nut 269-915 Grip Pad (not shown) 113-965 Pipe, Stainless Steel 1/2" x 3-1/2" 142-002DA Lockwasher Bradley Corporation • 215-604 Rev. U; EN 06-532G 6/21/07...