Dave Embedded Systems BORA Ultra Line ARM Cortex-A9 Quick Start Manual page 39

B E L K Q u i c k S t a r t G u i d e
●
●
●
●
●
●
4 In a 32 bit system, Vivado settings are configured with the following command
/opt/Xilinx/Vivado/2014.4/settings32.sh
5 Passing the -tclargs "-bitstream" parameters allows for automatic building of the FPGA bitstream.
<bora_repo>/boards/board_parts/zynq/BORA
<bora_repo>/boards/board_parts/zynq/BORAX
<vivado_2014.4_install_dir>/data/boards/board_
parts/zynq/
cd <bora_repo>
sudo cp -r boards/board_parts/zynq/BORA
/opt/Xilinx/Vivado/2014.4/data/boards/board_pa
rts/zynq/
sudo cp -r boards/board_parts/zynq/BORAX
/opt/Xilinx/Vivado/2014.4/data/boards/board_pa
rts/zynq/
export PROJ_DIR=$
(pwd)/../bora-build-YYYYMMDD-nobk
. /opt/Xilinx/Vivado/2014.4/settings64.sh
vivado -mode tcl -source build_project.tcl
-notrace -tclargs "-bitstream"
build_project
build_project



5
March, 2016
v . 1 . 0 . 9
4
39/66