Lanberg FF01 37U Series User Manual page 8

Step 5. Prepare M6 snap nuts (item T)
and fix them on the crossbar (item G),
then place the crossbar on the frame
(item D) avoiding the locking hole in the
frame. Use an M6 Allen screw (item U)
and an M5 self-tapping screw (item R) to
fix the crossbar.
Step 6. Use an M6 Allen screw (item
U) to attach the spacers (item Y) to the
crossbars (item G).
EN
Allen head
bolt
M6
(item U)
Self-tapping screw M5
(item R)
Allen head
bolt M6 (item U)
Lanberg © 2015-2021
Snap nut M6
(item T)
7