Bottom
Step 2. Unpack the frame parts (item D)
from pack 3/3. Then arrange the frames
parallel to each other, with the square holes
facing inwards. You can recognize the
lower part of the frame by the element for
installing the earthing.
Earth nut
Top
Step 3. Fit the top cover
(item E) onto the top parts
Earth nut
of the frame (item D), then
(Bottom)
use an M8 Allen screw
(item Q) to assemble them
together.
Step 4. Fit the lower cover (item F)
onto the lower part of the frame (item
D) and then use an M8 Allen screw
(item Q) and M8 flange nuts (item P)
to join them together.
Step 4a. Fit an M6 snap nut (item T)
Snap nut M6
in the square hole in the frame (indi-
(item T)
cated in the figure).
Lanberg © 2015-2021
EN
6