Advertisement
Quick Links
Advertisement
Related Manuals for Trelawny Single Scaler Standard Duty
Summary of Contents for Trelawny Single Scaler Standard Duty
- Page 1 Scaling Hammers Operation and Maintenance Manual www.trelawnyspt.co.uk...
-
Page 4: Operation
Employers should consider setting up a below 5.5bar (80p.s.i.) or rise above programme of health surveillance to Before operating Trelawny Scaling 6.9bar (100 psi) absolute maximum. establish a benchmark for each operator Hammers, this manual must be read and The compressor must be able to supply... -
Page 5: Maintenance
Valve body servicing (Workshop) EN ISO 1 1148-4:2010 Clamp the handle (10) assembly firmly in One Piece Piston and Piston/Cylinder Trelawny tools are thoroughly tested a soft face jawed vice (valve body end) assembly (Workshop) under specified conditions in accordance throttle lever upper most. - Page 6 EXPLODED VIEW...
- Page 7 EXPLODED VIEW...
-
Page 8: Parts List
PARTS LIST Item Item Part No Description Part No Description 615.3021 Valve Cap 615.5361 Spring Cap 809.0139 O’ Ring - Valve Cap 612.5301 Piston (Std taper fit) 712.3022 Valve Spring 613.5301 Cylinder (Std taper fit) 618.3022 Valve Stem 614.5301 Brush Seal 809.0089 O’... -
Page 9: Technical Specifications
© Copyright 2009, Trelawny SPT Limited, CV31 1XT. UK All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited. This applies to trademarks, model denominations, part numbers and drawings. - Page 10 NOTES...
- Page 11 NOTES...
- Page 12 Trelawny SPT Ltd 13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire, CV31 1XT, United Kingdom Telephone: +44 (0)1926 883781 - Fax: +44 (0)1926 450352 Email: sales@trelawny.co.uk www.trelawnyspt.co.uk © TSPT UK 2009 Part No: 735.5300 issue 03/10/17...
Need help?
Do you have a question about the Single Scaler Standard Duty and is the answer not in the manual?
Questions and answers