Related Manuals for Monroe Electronics 287a
Summary of Contents for Monroe Electronics 287a
- Page 1 Supplementary Manual Model 287a Ionizer Performance Analyzer 287a-1/100A V1.12 P/N 0345006 101107...
- Page 2 IPA 287a Display and Operational Chart Press [On/Off] to turn on the unit ME MONROE 287a Version 1.12 Press [On/Off] or Memory used: Auto-sequence tests 30%. wait for 5 seconds Manual tests 50%. If no data in memory (I.e. A=0%M=0%), this screen is not shown.
- Page 3 Press [^] or [v] + and - decay average of the group 1Ba+0017v -0005v 1Ba+0017v -0005v 25C 30%RH AutoSeq. group #1 (1-0) Balance test + and - voltage peaks Press [Enter] or [ON/OFF] back to Main IPA287Supplement Page 2 Monroe Electronics, Inc.
- Page 4 After the test complete, review data begins. Press [^] or [v] will scroll through the data. + 800V 3.6s 28C 9.0V 34% M1+ Press [Enter] or [ON/OFF] back to Main Timer starts at 1000V and stops at 100V IPA287Supplement Page 3 Monroe Electronics, Inc.
- Page 5 After the test complete, review data begins. Press [^] or [v] will scroll through the data. - 800V 3.6s Press [Enter] or [ON/OFF] back to Main 28C 9.0V 34% M3- Timer starts at 1000V and stops at 100V IPA287Supplement Page 4 Monroe Electronics, Inc.
-
Page 6: Auto Sequence Test
Press [Enter] will abort any on going test and back to Main. After the test complete, review data begins. Press [^] or [v] will scroll through the data. Press [Enter] or [ON/OFF] back to Main IPA287Supplement Page 5 Monroe Electronics, Inc. -
Page 7: Error Messages
Decay time out at 200 seconds, and the plate reading is still above + 216V 200.s Decay failed 100V. Check your ionizer. Recommend using Monroe Model 288 EEProm Fail Contact factory. IPA287Supplement Page 6 Monroe Electronics, Inc.
Need help?
Do you have a question about the 287a and is the answer not in the manual?
Questions and answers