Monroe Electronics 284 Operator's Manual

Nanocoulomb meter

Advertisement

Operator's Manual
Model 284
NanoCoulomb Meter
P/N 0340117
284-1/100
08012017
100 Housel Ave  PO Box 535  Lyndonville NY 14098
585-765-2254  fax: 585-765-9330 monroe-electronics.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 284 and is the answer not in the manual?

Questions and answers

Summary of Contents for Monroe Electronics 284

  • Page 1 Operator’s Manual Model 284 NanoCoulomb Meter P/N 0340117 284-1/100 08012017 100 Housel Ave  PO Box 535  Lyndonville NY 14098 585-765-2254  fax: 585-765-9330 monroe-electronics.com...
  • Page 2 Inner dimensions (nominal)— 6” dia. x 6¾” deep Faraday Cups are equipped with BNC connectors and furnished with 3-foot mating cable to connect to Model 284 instrument. Can be used to measure powders and liquids as well as solid objects.
  • Page 3 2 volts for full scale, regardless of range. In order to be fully functional, the Model 284 requires some sort of input source device. Two types of input devices are readily available from Monroe Electronics as accessories to the Model 284—Faraday cups and contact probes.
  • Page 4 Section 3 OPERATION The Monroe Electronics Model 284 Nanocoulomb Meter has been designed for extreme ease of operation. Connect Faraday cup to Model 284. Switch power on. Set to least sensitive range (decimal point furthest to the right for your instrument).
  • Page 5 CALIBRATION CHECK The purpose of this section is to provide the operator of the Monroe Electronics Model 284 Nanocoulomb Meter with a means of verifying that overall calibration of the instrument is within the specified limits (±2%).
  • Page 6 Monroe Electronics. In the event of a breach of the foregoing warranty, the liability of Monroe Electronics shall be limited to repairing or replacing the non-conforming goods and/or defective work, and in accordance with the foregoing, Monroe Electronics...
  • Page 7 Repairs will be returned promptly. Repairs are normally returned to the customer by UPS within 10 to 15 working days after receipt by Monroe Electronics, Inc. Return (to the customer) UPS charges will be paid by Monroe Electronics on warranty work. Return (to the customer) UPS charges will be prepaid and added to invoice for out-of- warranty repair work.

Table of Contents