VERTICAL
STORAGE SHED
MODEL 60209
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 2 people are recommended for setup
GET ASSEMBLY HELP
WATCH THE INSTRUCTIONAL VIDEOS ON YOUTUBE.
Scan the code, or search http://go.lifetime.com/60209playlist
For customer service in the United Kingdom and continental Europe:
É-mail: cs@lifetimeproducts.eu
FOR DOMESTIC OUTDOOR USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
Electric Drill
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
ADC #2 Phillips Bit
(Included)
Live Chat: www.lifetime.com
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
FRS 1/4" (6,4 mm) Drill Bit
(Included)
ARA 1/8" (3,2 mm) Drill Bit
(Included)
MODEL# AND PRODUCT ID
Model Number: 60209
Product ID:
TABLE OF CONTENTS
Icon Legend...................................................4
Warnings & Notices......................................5
Parts Identifi er..............................................6
Floor & Wall Assembly..................................7
Door Assembly.............................................23
Shed Anchoring...........................................42
Cleaning & Care..........................................47
Registration..............................................48
Warranty....................................................49
(both are needed when contacting us)
Need help?
Do you have a question about the 60209 and is the answer not in the manual?
Questions and answers
Tube FEK will not slide into AGZ door
Based on the provided context, the tube FEK may not slide into the AGZ door for part number 60209 because:
1. The tube must be inserted into the hole at the bottom corner of the door and hang out a few inches. If it does not align correctly or is inserted at the wrong angle, it may not slide in.
2. An End Cap (AHS) must be inserted into the tube before continuing insertion. If the End Cap is missing or not fully seated, the tube may not fit or align with the holes in the door.
3. The holes in the tube and door must align. If they are not aligned, the tube may stop partway and not slide in fully.
Check for correct orientation, proper insertion of the End Cap (AHS), and alignment of the holes.
This answer is automatically generated
@Mr. Anderson