Using Your Electronic Control - Marvel MLBV215 Quick Reference Manual

Control Function Guide
Function
ON/OFF
Leave Interior Light On
Adjust Temperature
Toggle Between o F / o C
Enable Sabbath Mode
Disable Sabbath Mode
Showroom Mode

USING YOUR ELECTRONIC CONTROL

Electronic control
Command
Press and hold for 5 seconds.
Press and release to leave interior light on for
3 hours; press again to deactivate.
Press or and release.
Hold and for 5 seconds.
Press and hold for 5 seconds and release.
Press , hold for 5 seconds and release.
Hold and for 5 seconds.
Figure 13
Notes
Unit will immediately turn ON or OFF.
After 12 hours, factory default is restored; light will turn on when
door is open.
When the display is flashing, press
point temperature. Note: temperature displayed is the actual
temperature inside unit.
The display will change units.
The o F / o C symbol will flash briefly after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate.
Display and interior light return to normal operation.
Display will show
will function normally, but the compressor and fans will not be
energized. Repeat command to return to normal operation.
Display will show
NOTE
Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing
towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Marvel recommends allowing the unit to reach set points before
loading.
10
or to adjust the set
for 2 seconds. Interior light and display
for 2 seconds.