Bissell POWERFORCE COMPACT 2112 Series User Manual page 6

Using Your Vacuum
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all fi lters, both pre and post-fi lters are in place. DO NOT operate your vacuum without
these fi lters.
1 2
Twist the Upper Quick
Connect power cord plug
Release Cord Wrap down
to a polarized outlet.
to quickly remove cord.
4
Press the handle recline
pedal with your foot to
place your vacuum in one
of three positions:
Upright - For storage and
transporting.
Normal Cleaning - Press
handle release pedal once
for most household floor
cleaning tasks.
Low Cleaning - With
the vacuum in normal
cleaning position, press
handle release pedal again
for reaching under low
furniture, such as tables,
chairs, or beds.
NOTE: Some berber carpets have a tendency to fuzz with wear. Repeated strokes
in the same area may enhance this condition.
6
www.BISSELL.ca
3
Step on the red power
switch on the back to
turn the unit ON.
5
To turn the unit OFF,
step again on the red
power switch on the
back of the unit, found
under the cord wraps.