Clas Ohlson E0108T2C Instruction Manual

Indoor/Outdoor
Thermometer
Art.no 36-6722 Model E0108T2C
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• The thermometer must not be dismantled or modified in
any way.
• The thermometer is only intended for indoor use.
Do not expose it to moisture.
• The thermometer is not intended to be used as a reference
thermometer and Clas Ohlson will not be held liable for any
damage which may result from inaccurate readings.
• The batteries should be removed from the thermometer if it is
not to be used for an extended period, otherwise they might
leak and damage the thermometer. Never leave a discharged
battery in the battery compartment.
• The max and min readings will be deleted whenever
the batteries are is removed.
• The thermometer must never be subjected to shocks
or impacts.
Note:
• Do not mix old and new batteries or batteries of different types.
• Do not mix alkaline, regular or rechargeable batteries.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Buttons and functions
1
2
3 4
1. Outdoor temperature
2. Indoor temperature
3. [ C/F ] For selecting temperature unit, ºC or ºF
4. [ MAX/MIN ] Select min/max temperature display mode
5. Hanging slot
6. Table stand
7. Battery cover
Installation
1. Slide the battery cover (7) down to access the battery
compartment.
2. Insert 2 × AAA/LR03 batteries (sold separately) observing
the polarity markings in the battery compartment.
3. Click the battery cover back into place.
4. Choose where the thermometer is to be placed:
- Standing on a flat surface using the table stand (6).
- Hanging on a wall using the hanging slot (5).
5. Make sure that the end of the sensor lead is outside so that
the it can register the outdoor temperature.
Operating instructions
1. Select the units, Celsius or Fahrenheit, using the [ C/F ]
5
button (3).
2. Press [ MAX/MIN ] (4) to display the maximum or minimum
6
temperature. The display will return to displaying the current
temperature after a few seconds.
3. Hold [ MAX/MIN ] pressed down for a few seconds to clear
the max/min temperature memory.
7
Care and maintenance
Clean the product using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
Troubleshooting
If "HH" or "LL" appears, it means that the measured
temperature lies outside of the thermometer's range.
Responsible disposal
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your product,
take it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Temperature (indoor)
Temperature (outdoor)
Accuracy
Batteries
Size
Sensor lead
Weight
−9.9 to 50 ºC (14 to 122 ºF)
−30 to 60 ºC (−22 to 140 ºF)
±0.5 ºC
2 × AAA/LR03 (sold separately)
62 × 97 × 15 mm
1.5 m
66 g