General Safety Instructions - Bosch Rexroth HAD 1 Series Operating Instructions Manual

12/44 Safety instructions
Bosch Rexroth AG, Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20

2.5 General safety instructions

• Observe the valid regulations on accident prevention and environmental protection.
• Observe the safety regulations and provisions of the country in which the product
is used/applied.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notes on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products must
not consume any alcohol, drugs or pharmaceuticals that may affect their ability to
react.
• Only use spare parts approved by the manufacturer in order to exclude any hazard
to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions indicated in the
product documentation and on the type cap.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating states when being used which in turn could
cause personal injuries and/or damage to property. Therefore, only use a product
for safety-relevant applications if this use is expressly specified and permitted
in the documentation of the product, e.g. in explosion-protected areas or in
safety-related parts of control systems (functional safety).
• Do not commission the product until you can be sure that the end product
(for example a machine/system) where the Rexroth products are installed complies
with the country-specific provisions, safety regulations and standards of the
application.