Attaching The Bumper Bar 14 Footrest - G&G Hopscotch Quick Start Manual

ASSEMBLY
Rear wheels
Attaching the rear wheels
Insert the axle into the rear wheel housing on the chassis. The wheel will click
when properly inserted. Repeat on the other side.
Removing the rear wheels
To remove the rear wheels, press the button underneath the brake, slide the
wheel out while pressing the button.
ASSEMBLY
Bumper bar
Attaching the bumper bar
Line the bumper bar up with the receptacles on either side of the stroller
seat, and push both sides into them. Each side will click into place when
properly attached. To confirm the bar is properly attached try pulling the bar
away from the seat.
CLICK
Removing the bumper bar
To remove the bar, find the release button on the underside of the
receptacles, push in and pull the bar out.
Note: You can remove one side and swing the bar away for better access
to your child.
9