G&G Hopscotch Quick Start Manual page 5

ASSEMBLY
Opening Chassis
Squeeze the handle button and rotate the handle away from the chassis,
until it clicks in place. (pic 1)
Lift the handle up.(pic 2) (pic 3)
Keep lifting the handle up as the chassis unfolds, until the handle clicks into
its fully open position. Listen for the click. (pic 4)
Raise the seat backrest, and continue rotating the seat backrest until the
seat is fully secured and locked into place, listen for the click.
(pic 5) (pic 6) (pic 7)
CLICK
ASSEMBLY
Front wheels
Attaching the front wheels
Insert the swivel pin into the front wheel housing on the stroller
chassis. The wheel will click when it is properly inserted.
Removing the front wheels
To remove the front wheels press the button above the swivel lock,
and slide the wheel out while holding it down
CLICK
CLICK