VBM DOMOBAR SUPER Instruction Manual page 78

Edit current profile
Select the desired profile from the list and press the key (
displayed press the key (
up the profile.
Set the pressure and time value using the keys (
segment 1 to segment 2 and repeat the operations up to segment seven.
At the end of the seven segment setting, the screen where you can enter the profile name
will appear, after typing the name, press the (
Pressure's profiles
VBM N. 1
VBM N. 2
VBM N. 3
30
) to access the modification of the seven segments that make
) key to confirm the setting.
VBM n. 1
09
modify
Segment
bar
0 0
), when the next screen is
) then press the key (
bar
rename apply
sec.
0 0
) to go from
Profilo applicato