LOWES SBSWAD002GY Assembly Instruction Manual

Download this manual

ASSEMBLY INSTRUCTION

Please read this before beginning assembly and follow instructions carefully

Important Safety Instructions:

Please read this instruction carefully prior to assembly.

Please ensure all parts and hardware are available in the package prior to assembly.

Use the parts and hardware lists to identify each component included.

Save all packaging material until the completion to avoid any accidental discarding of smaller

parts or hardware.

Care should be taken to avoid tipping while seated.

This chair is designed for use on level ground only. Do not use on unlevel ground.

This chair is rocking style. When swinging be careful the child accidentally entering.

Assembly tips:

Please align pre drilled holes accurately during installation

Please insert screws in the right angle

This product can be damaged if parts are not correctly assembled

ITEM#: SBSWAD002GY SBSWAD002NC

SBSWAD002DB SBSWAD002WN

THANK YOU FOR PURCHASING

Need help?

Do you have a question about the SBSWAD002GY and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION ITEM#: SBSWAD002GY SBSWAD002NC SBSWAD002DB SBSWAD002WN Please read this before beginning assembly and follow instructions carefully Important Safety Instructions: Please read this instruction carefully prior to assembly. Please ensure all parts and hardware are available in the package prior to assembly.
Page 2: Parts List
PARTS LIST BACKREST FRONT LEG 2PCS BACKREST 2PCS SUPPORT FRAME MIDDLE BACKREST CROSS BEAM ARMREST 2PCS ARMREST 2PCS SUPPORT 2PCS BASE LEG BASE BOTTOM SUPPORT SEAT SLATS FRONT SEAT SLAT BAST LEGS CROSS BEAM ARMREST 2PCS CONNECTION FRONT LEG CROSS BEAM RUNNER 2PCS...
Page 3: Hardware List
HARDWARE LIST BOLT 52PCS+3 extra (3.5*40 mm) BOLT 8PCS+1 extra (8*55 mm) BOLT 10PCS+1 extra (8*60 mm) WRENCH TOOLS REQUIRED (not included): > Driller with Cross Head Bit or Philips screwdriver > Adjustable Wrench...
Page 4 ASSEMBLY INSTRUCTION STEPS Please make sure that there is no space between parts before turning the screws. Step1 Step2 Step3 Put the screw in but don't lock it. (To reserve room for adjustment to fit STEP 9 complete) Please lock it when you after completing STEP 9.
Page 5 Put the screw in but don't lock it. (To reserve room for adjustment Step4 to fit STEP 9 complete) Please lock it when you after completing STEP 9. Step5...
Page 6 Step6 Step7...
Page 7 Step8 Step9 When you fix STEP 9 and lock the screws, please lock the STEP 3 & STEP 4 screws.
Page 8 Final Assembly Maximum weight capacities: 250lbs...

Sbswad002ncSbswad002dbSbswad002wn