Technical Data - Husqvarna 585 Operator's Manual

To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, liter/cm
Oil tank capacity, liter/cm
Type of oil pump
Weight
Weight, kg
2
Noise emissions
Sound power level, measured according to ISO 22868, dB(A)
3
Sound levels
Equivalent sound pressure level at the operator's ear, measured ac-
cording to ISO 22868, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
2
Reported data for the noise output level has a typical dispersion (standard deviation) of 2 dB (A).
3
Reported data for equivalent sound pressure level for the product has a typical statistical dispersion (standard
deviation) of 1 dB (A).
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
34
Technical data
3
3
3
4
hveq
2
.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
5. Do a complete servicing of the product.
Husqvarna 585
86.0
2800
5.1/6.9 @ 9600
NGK CMR6H
0.5
0.86/860
0.42/420
Adjustable
7.5
118
112
6.7
5.9
If the saw chain and
# for instructions.
1629 - 001 -