Function Settings By Using Remote Controller - Fujitsu ARXG45KHTA Design & Technical Manual

9-2. Function settings by using remote controller

Some function settings can be changed on the remote controller. After confirming the setting proce-
dure and the content of each function setting, select appropriate functions for your installation envi-
ronment.
¢ Setting procedure by using remote controller
Remote controller is not attached for this product. For details of the installing remote controller, refer
to following information.
• Overview information: Operating manual of the remote controller
• Setting procedure: Installation manual of the remote controller
¢ Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
 Function setting list
Function no.
1) 11
2) 30
3) 31
4) 40
5) 42
6) 46
7) 48
8) 49
9) 51
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
2) Room temperature sensor control for cooling
Depending on the installed environment, correction of the room temperature sensor may be re-
quired. Select the appropriate control setting according to the installed environment.
Function number
30
9-2. Function settings by using remote controller
Filter sign
Room temperature sensor control for cooling
Room temperature sensor control for heating
Auto restart
Room temperature sensor switching
External input control
Room temperature sensor switching (Aux.)
Indoor unit fan control for energy saving for cooling
Primary and secondary settings
Setting value
00
01
02
03
Setting value
00
01
02
03
Functions
Setting description
Standard (2,500 hours)
Long interval (5,000 hours)
Short interval (1,250 hours)
No indication
Setting description
Standard
Higher control
Slightly lower control
Lower control
- 26 -
Factory setting
♦
Factory setting
♦
9. Function settings