Honeywell HJ Series User Manual page 17

USE AND OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
SLEEP MODE
Sleep Mode is for energy-saving comfort during the night. When Sleep Mode
Conditioning Cooling Mode, the fan will automatically stay on LOW Speed and the set temperature
will increase by 1°F (1°C) on the first hour. It will increase another 1°F (1°C) on the second hour, and
remain at this temperature for the rest of the night, until Sleep Mode is deactivated.
Note: The control panel lights will turn OFF after 10 seconds and light up again when any button is
pressed. When Sleep Mode is ON in Heating Mode*, the fan will automatically stay on LOW Speed
and the set temperature will decrease by 1°F (1°C) on the first hour. It will decrease another 1°F (1°C)
on the second hour, and remain at this temperature for the rest of the night, until Sleep Mode is
deactivated.
TIMER CONTROL
While the unit is turned on, press the timer button then press the
hours you would like the unit to continue to run. The unit will turn on/off automatically.
AUTO TURN OFF:
While unit is running, press the
in air conditioning mode.
AUTO TURN ON:
When unit is in a standby mode (plugged in with power light on), then press the
select the number of hours until you want the unit to automatically start running.
SWING CONTROL
Press to activate automatic oscillation of louvers. Press again to stop swing when louvers reached
a desired angle.
WATER FULL LIGHT
Condensation may accumulate in the unit.
If the internal tank becomes full, the Water Full Light
5 seconds. The unit will not operate until the unit has been drained (refer to Water Condensation
Drainage).
WI-FI MODE^
When the Smart Portable Air Conditioner is connected to the wifi function, the
will be illuminated.
^THIS IS ONLY FOR MODEL HJ12CESV** / HJ14CESV** / HJ16CESV** WITH WI-FI SMART
FEATURES
ADDITIONAL FEATURES:
AUTOMATIC DEFROST FEATURE
Sometimes when the unit is operating in cooling mode in lower room temperatures (e.g. lower than
60°F), the internal cooling coils may become too cold and sometimes frost may develop on the
cooling coils. When this happens, the unit will automatically pause operation and defrost the cooling
coils to protect the unit. The air conditioner will restart automatically when the system has defrosted
and returns to standard operational temperatures.
or button to select the number of hours you want the unit to run
EN 9
or to select the number of
will illuminate and unit will beep 5 times for
*Applicable for models with Heating feature only.
is ON in Air
or button to
indicator light