Table of Contents
Advertisement
CCS Technical Documentation
3.
Remove IR-window from A-cover assembly
Start with snap joint at the middle of IR-lens by pushing it with screw driver with chisel
point. There are four snap joints altogether.
4.
Remove LCD gasket from A-cover
Tear gasket off from A-cover starting from the corner shown in figure above.
5.
Remove microphone from system connector
Lift microphone and gasket out from system connector.
Issue 1 07/02
Assembly & Disassembly Instructions
ãNokia Corporation
NPM-2NX
Page 17
Advertisement
Table of Contents
