User Groups; Care And Maintenance; Warranty - Weller WT 2M Original Instructions Manual

EN
ENGLISH
Store your soldering tool in a safe place. When not in
area out of the reach of children. Make sure that unused
soldering tools are free of voltage and de-pressurised.
The power cable must only be plugged into the power
socket or adapter approved for this purpose.
Do not use the cable for purposes other than those for
which it is intended.
not use the cable to pull the plug out of the socket. Protect
the cable against heat, oil and sharp edges..
Be alert.
Avoid abnormal posture.
unit, as this can lead to postural problems.
The soldering tool must be operated only in perfect
technical working order.
deactivated.
Faults and defects must be repaired immediately.
in the manner intended. Check that moving parts are func-
operation of the unit.
Use the correct tool.
vices which are included in the list of accessories or appro-
Secure the tool.
workpiece.
Use a solder fume extraction unit. If appliances for
connecting solder fume extraction units are available, ensure
indoors. Protect against moisture and direct sunlight.
1.800.561.8187
20

User groups

Due to differing degrees of risk and potential hazards, sever-
Work step
Default soldering para-
meters
Replacing electrical repla-
cement parts
Default maintenance
intervals
Operation
Operation
Replacing electrical repla-
cement parts

Care and maintenance

WARNING
Before doing any work on the machine, pull the plug out
of the socket. Leave the unit to cool down.
Check all connected cables and hoses on a regular basis. If
removed from use.
Repairs must always be referred to a Weller-trained
specialist.
-

Warranty

accordance with §§ 478, 479 BGB (German Federal Law
Gazette).
persons.
For more information please visit
www. .com
User groups
Specialist personnel with
technical training
Electricians
Non-specialists
Technical trainees under the
guidance and supervision of a
trained expert
information@itm.com