Advertisement
With the indicator ON, hold the SHIFT key down and press the Navigation ENTER key (red
square key in center of the Navigation arrows). The display will change to show the
SETUP/REVIEW MENU.
1.ENTER CALIBRATION AND SETUP
2.VIEW AUDIT TRAIL COUNTERS
3.CALIBRATE SCALE 1
Enter Selection: 1
Press the ENTER key, then press the NEXT Navigation arrow until SETUP MENU #3 is
displayed.
1. G/N ACCUMS=XXX
2. BACK LITE= X
3. PASSWORD
4. 2XX-IP
5. BADGE RDR
Enter Selection: 0
Press the 4 key and then the ENTER key, the 2XX-IP SETUP MENU will be displayed.
1. CONT=XXX
2. TYPE=X XXXXXXXXX
3. SCALE = 0
Enter Selection: 0
1. CONT=XXX
To turn the continuous data output ON or OFF, press the 1 key and then the ENTER key.
CONT=XXX
YES
Press the YES and ENTER keys to turn continuous data output ON or press the NO and
ENTER keys to turn it off.
225 INDICATOR SETUP
SETUP/REVIEW MENU
9.DEL CUSTOM TICKET
10.PRINT SETUP
^
EXIT
SETUP MENU #3
6. KEY LOCKOUT
7. LRPort=COM3
^
PREV
2XX-IP SETUP MENU
^
EXIT
2XX-IP SETUP MENU
8200-M503-01 Rev-B • 2XX-IP
`
EXIT
NO
7
Advertisement
