Overview of main menu
In the main menu, you can check and adjust all of the
settings for the appliance's range of functions.
Available menus:
" . " Temperature level
■
■
" . " Information
" . " Heating curve
■
■
" . " Time program for central heating and DHW
heating
Main menu call-up
Tap the following buttons:
1.
to call up the main menu.
Operating programs for central heating and DHW heating
Note
The operating programs for central heating and DHW
heating can be set separately or all together for the
entire system.
Operating program
Central heating
Heating circuit 1
and/or heating circuit 2
is active.
Heating circuit 1
and/or heating circuit 2
is not active
DHW heating
DHW
is active.
DHW
is not active.
■
" . " Display brightness
■
" . " Display standby mode
" . " Internet access and information
■
■
" . " Low power radio access and information
" . " Lightguide
■
■
" . " Date
" . " Time
■
2.
for the required menu
3. "OK"
to confirm
Function
The rooms of the selected heating circuit are heated in accordance
with the specified room temperature or flow temperature and the
time program: See chapter "Central heating".
Note
In room temperature-dependent operation, a time program for cen-
tral heating can only be set at the room temperature controller or
OpenTherm controller: See the operating instructions for the room
temperature controller or OpenTherm controller.
No central heating
■
Frost protection for the heat generator is active.
■
DHW is heated in accordance with the specified DHW temperature
and time program: See chapter "DHW heating".
No DHW heating
■
Frost protection for the DHW cylinder is active.
■
Operation
15