laguna JX12 Sheartec:II Owner's Manual
  1. Manuals
  2. Brands
  3. laguna Manuals
  4. Power Tool
  5. JX12 Sheartec:II
  6. Owner's manual

laguna JX12 Sheartec:II Owner's Manual

Jointers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
JX|12 & JX|16 Sheartec:II Jointers
Owner's Manual
MJ12X88P-0130
MJ16X100P-0130
3/11/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JX12 Sheartec:II and is the answer not in the manual?

Questions and answers

Related Manuals for laguna JX12 Sheartec:II

Summary of Contents for laguna JX12 Sheartec:II

  • Page 1 JX|12 & JX|16 Sheartec:II Jointers Owner's Manual MJ12X88P-0130 MJ16X100P-0130 3/11/2021...
  • Page 2 For immediate service on any Laguna Tools products: +1 (949) 474-1200 customerservice@lagunatools.com Laguna Tools, Inc. LAGUNA® and the LAGUNA Logo® are the registered trademarks of Laguna Tools, Inc. All rights reserved. 04/01/2019 LAGUNA AMERICAN HEADQUARTERS Texas: 744 Refuge Way Suite 200, Grand Prairie, Texas 75050, U.S.A. Phone: +1-800-332-4094 Huntington Beach: 7291 Heil Ave Huntington Beach, CA 92647, U.S.A.

  • Page 3: Table Of Contents

    Setup ............15 Placement & Unboxing ......15 Inventory List .......... 17 Assembling ..........18 Operation ............. 24 Maintenance ..........27 Troubleshooting ..........30 Wiring ............31 JX12 Sheartec:II Parts ........34 JX16 Sheartec:II Parts ........44 Warranty ............55...

  • Page 4: Safety

    JX|12 & JX|16 Sheartec:II Jointers \ Safety Safety Read and understand all warnings and operation instructions before using any tool or equipment. Always follow basic safety precautions to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed.
  • Page 5 JX|12 & JX|16 Sheartec:II Jointers \ Safety PROP 65 WARNING SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. SOME EXAMPLES OF THESE CHEMICALS ARE: ·...
  • Page 6 JX|12 & JX|16 Sheartec:II Jointers \ Safety WEARING PROPER APPAREL. Do not wear clothing, apparel or jewelry that can become entangled in moving parts. Always tie back or cover long hair. Wear non-slip footwear to reduce risk of slipping and losing control or accidentally contacting cutting tool or moving parts.
  • Page 7 JX|12 & JX|16 Sheartec:II Jointers \ Safety 3. PUSH BLOCKS THE CUTTER HEADS ARE EXTREMELY DANGEROUS AND YOU MUST NEVER PASS YOUR HANDS OVER THE CUTTER HEAD. ALWAYS USE PUSH BLOCKS WHENEVER SURFACE PLANNING. HAND SAFETY. IT IS GOOD PRACTICE TO MOVE THE HANDS IN AN ALTERNATE MOTION FROM BACK TO FRONT AS THE WORK CONTINUES THROUGH THE CUT.

  • Page 8: Electrical Safety

    JX|12 & JX|16 Sheartec:II Jointers \ Electrical Safety Electrical Safety WARNING! · RUNNING ON A DIFFERENT VOLTAGE THAN STATED BELOW WILL DAMAGE THE MACHINE. NEVER RUN THE MACHINE IN WET OR DAMP CONDITIONS. · ELECTROCUTION, FIRE, SHOCK, OR EQUIPMENT DAMAGE MAY OCCUR IF MACHINE IS NOT PROPERLY GROUNDED AND CONNECTED TO POWER SUPPLY.
  • Page 9 JX|12 & JX|16 Sheartec:II Jointers \ Electrical Safety MJ16X100P-0130 VOLTAGE 220V PHASE HERTZ 60Hz FULL LOAD AMPERAGE 20AMP Below are RECOMMENDATIONS to be used for this machine based on the above information. Variables that may affect this are: · Actual voltage supplied to the machine ·...
  • Page 10 JX|12 & JX|16 Sheartec:II Jointers \ Electrical Safety Grounding Methods DANGER! THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK. IN ALL CASES, MAKE CERTAIN THAT THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE.
  • Page 11 JX|12 & JX|16 Sheartec:II Jointers \ Electrical Safety Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Use only 3-wire extension cords that have 3-prong grounding plugs and 3 pole receptacles that accept the tool's plug.
  • Page 12 JX|12 & JX|16 Sheartec:II Jointers \ Electrical Safety Extension Cords Use proper extension cords. Make sure your extension cord is in good condition and is a 3- wire extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug.

  • Page 13: Specifications

    JX|12 & JX|16 Sheartec:II Jointers \ Specifications Specifications JX|12 & JX|16 Sheartec:II Jointers JX|12 SHEARTEC: II JX|16 SHEARTEC: II MJ12X88P-0130 MJ16X100P-0130 VOLT HP MOTOR AMP. RECOM. 230V 5HP 1PHASE 60HZ/23AMP. 230V 7.5HP 3PHASE 60HZ /20 AMP. SIZE BRKR. BED SIZE 12 X 88"...

  • Page 14: Machine Overview

    JX|12 & JX|16 Sheartec:II Jointers \ Machine Overview Machine Overview JX|12 & JX|16 Sheartec:II Jointers Figure 10: Main Components A. Emergency Stop (E-STOP); stops all functions of machine, however, power continues to machine. NOTICE! To reset E-STOP, rotate switch clockwise until the button “pops” out. NOTICE! E-STOP bump bar (red) located on front of frame.

  • Page 15: Setup

    ALL SHIPPING DAMAGE MUST BE NOTED UPON DELIVERY AND SIGNED BY THE OWNER AND THE DELIVERY DRIVER. IF YOU FIND ANY DAMAGED ITEMS IN YOUR PACKAGE, YOU MUST CONTACT LAGUNA TOOLS TO FILE A COMPLAINT. IN ORDER TO RETURN DAMAGED GOODS UNDER THE LIMITED WARRANTY TO LAGUNA TOOLS, INC., YOU MUST HAVE THE ORIGINAL PACKAGING.
  • Page 16 JX|12 & JX|16 Sheartec:II Jointers \ Setup Placement & Unboxing 6. Allow an area for the storage of blanks, finished products and tools. Unboxing WARNING! · THE MACHINE WEIGHS 1043 LBS (473KG) (THE JX16 WEIGHS 1254 LBS (568KG) ). ENSURE THAT YOU HAVE ENOUGH PEOPLE TO DO THE JOB SAFELY.

  • Page 17: Inventory List

    JX|12 & JX|16 Sheartec:II Jointers \ Setup Placement & Unboxing drilled in the machine with nuts welded to the back of the base. The machine can then be lifted with a harness and forklift. Remove and save hooks for later movement scenarios. FIGURE 5: HOOK FOR LIFTING (1 OF 4) Inventory List The following depicts items shipped with your machine.

  • Page 18: Assembling

    JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling Assembling Machine Preparation and Setup: 1. The machine is supplied with four leveling feet. Depending on the model they may require installation. Raise and block one side of jointer. Install two leveling feet into threaded nut welded into corner of base.
  • Page 19 JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling FIGURE 8: ATTACHING SWIVEL FIGURE 7: SWIVEL CASTER ASSEMBLY CASTER FIGURE 9: ATTACHING CASTERS Parts List for Universal Caster Set REF NO PART NUMBER DESCRIPTION SPECIFICATION JK0008 UNIVERSAL CASTER SET 000104-106 CAP SCREW M8-1.25X20 006305-100 SPRING WASHER...
  • Page 20 JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling disconnect following all applicable codes. Confirm your motor electrical configuration before connecting power! It is listed on the serial plate on the back of the machine and on the motor label. Before connecting the machine to the power source, make sure the starter and/or switches are in the "OFF"...
  • Page 21 JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling Adjusting the Fence The fence can be adjusted to use all or a portion of the cutterhead. To adjust, loosen the Fence Slide Lock (Fig. 14) and slide the fence to the desired position. NOTICE! Secure both locks when fence is in position.
  • Page 22 JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling Calibrating the DRO (Digital Read Out) 1. Remove the battery cover of the DRO and install 2 AAA batteries. FIGURE 22: DRO BATTERIES 2. Turn jointer OFF, with the cutter head not rotating, and power disconnected. 3.
  • Page 23 JX|12 & JX|16 Sheartec:II Jointers \ Setup Assembling...

  • Page 24: Operation

    JX|12 & JX|16 Sheartec:II Jointers \ Operation Operation CAUTION! PLACE THE JOINTER ON A SECURE AND STABLE SURFACE FOR OPERATION. CLAMP OR BOLT THE JOINTER INTO POSITION. 1. Establish the proper depth of cut. 1/64” is the recommended maximum cut for the best finish with least chance of kick-back when jointing.
  • Page 25 JX|12 & JX|16 Sheartec:II Jointers \ Operation Beveling The fence can be adjusted up to 45 degrees angled toward the infeed/outfeed tables (bed) or away from the infeed/outfeed tables (bed) for beveling. There is less chance of stock slippage when the fence is angled down, toward the tables (Fig.
  • Page 26 JX|12 & JX|16 Sheartec:II Jointers \ Operation Rabbeting Rabbeting is a grove along the edge of stock. The stock can be on edge or face, depending on the dimensions required for the rabbet. Position fence for width of rabbet cut. This is the distance from the outmost edge of the outermost knife insert to the fence.

  • Page 27: Maintenance

    JX|12 & JX|16 Sheartec:II Jointers \ Maintenance Maintenance General Keep your machine clean. At the end of each day, clean the machine. Wood contains moisture, and if sawdust or wood chips are not removed they will cause rust. In general, we recommend that you only use a Teflon-based lubricant on the jointer. Regular oil attracts dust and dirt.
  • Page 28 JX|12 & JX|16 Sheartec:II Jointers \ Maintenance Knife rotation/replacement CAUTION! KNIFE INSERTS ARE DANGEROUSLY SHARP. USE EXTREME CAUTION WHEN INSPECTING, REMOVING, OR REPLACING KNIFE INSERTS. WARNING · TURN JOINTER OFF AND DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE OR ADJUSTMENTS! · MAKE SURE ALL KNIFE INSERT SCREWS ARE TIGHTENED SECURELY.
  • Page 29 JX|12 & JX|16 Sheartec:II Jointers \ Maintenance Outfeed Table Adjustment: WARNING · TURN OFF AND DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE OR ADJUSTMENTS! The outfeed table is adjusted at the factory to be level with (or within .006” of) the Top Dead Center (TDC) of the knife inserts.

  • Page 30: Troubleshooting

    JX|12 & JX|16 Sheartec:II Jointers \ Troubleshooting Troubleshooting Symptom Possible Cause Possible Solution MACHINE WILL 1. FUSE BLOWN OR CIRCUIT BREAKER TRIPPED 1. REPLACE FUSE OR RESET CIRCUIT BREAKER NOT START 2. CORD DAMAGED 2. HAVE CORD REPLACED 3. NOT CONNECTED TO POWER SOURCE 3.

  • Page 31: Wiring

    JX|12 & JX|16 Sheartec:II Jointers \ Wiring Wiring WARNING REVIEW ELECTRICAL SAFETY PRIOR TO ANY WIRING PROCEDURES. MJ12X88P-0130 VOLTAGE 220V PHASE HERTZ 60Hz FULL LOAD AMPERAGE 23Amp Below are RECOMMENDATIONS to be used for this machine based on the above information.
  • Page 32 JX|12 & JX|16 Sheartec:II Jointers \ Wiring JX|12 ShearTec: II MJ12X88P-0130...
  • Page 33 JX|12 & JX|16 Sheartec:II Jointers \ Wiring JX|16 ShearTec: II MJ16X100P-0130...

  • Page 34: Jx12 Sheartec:ii Parts

    JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts JX12 Sheartec:II Parts Cutterhead & Drivetrain...
  • Page 35 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts Fence...
  • Page 36 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts Stand & Motor...
  • Page 37 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 000104-104 CAP SCREW M8-1.25X16 006305-100 LOCK WASHER 8.2-13.7 174771-008 FENCE COVER 000804-101 ROUND HEAD HEX SCREW M5-0.8X8 250683-615 KNOB 361438-904 HANDLE ROD 361439-902 SWING AXIS...
  • Page 38 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 174622-904 TILT PLATE 000003-108 HEX SCREW M8-1.25X40 008006-100 HEX NUT M8-1.25(13BX6.5H) 174956-904 SAFETY PLATE 000104-110 CAP SCREW M8-1.25X30 006001-009 FLAT WASHER 5.2-10X1.0 361367-902 CONNECT ROD...
  • Page 39 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 042505-000 CORD PLUG HP-13 300118-909 BEARING BRACKET 174646-196 REAR BASE COVER - R 174649-156 POINTER 361298-902 SUPPORT SHAFT 009004-100 HEX NUT 1/4-20(11BX5.5H) 230275-000 SET SCREW 1/4"-20X3/4"...
  • Page 40 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 174516-902 LEAD SCREW SEAT 001501-101 CAP SCREW W/SPRING WASHER & M8-1.25X20/8.2-15.4/8.5- WASHER 19X2 010006-000 RETAINING RING STW-15 320398-000 GEAR 000203-101 SET SCREW M6-1.0X6 361301-902 WORM GEAR...
  • Page 41 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 000801-104 ROUND HEAD HEX SCREW M6-1.0X20 174612-008 RULER BRACKET 000103-106 CAP SCREW M6-1.0X16 000301-204 PAN HEAD SCREW M3-0.5X15 006002-139 FLAT WASHER 3-8X1.0 030127-001 BALL BEARING...
  • Page 42 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 471037-107 CONNECT CORD 18AWG/1CX200MM 491184-000 SOCKET 125V/15A 174928-904 SOCKET BRACKET 000302-102 PAN HEAD SCREW M4-0.7X8 006501-100 INT. TOOTH WASHER 4.3-8.5(BW-4) 006002-200 FLAT WASHER 4.3-8X0.8 006001-001 FLAT WASHER 4.3-10X1.0...
  • Page 43 JX|12 & JX|16 Sheartec:II Jointers \ JX12 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 174929-000 STAND 340007-615 BLOCK 230403-000 FEET BOLT 174954-156 EMERGENCY STOP PLATE 938112-001 MAGNETIC SWITCH ASSEMBLY 5HP/220V-240V/1PH 244.1 170977-901 SWITCH PLATE 244.2 821017-066 MAGNETIC SWITCH 5HP/220V-240V/1PH 244.3...

  • Page 44: Jx16 Sheartec:ii Parts

    JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts JX16 Sheartec:II Parts Cutterhead & Drivetrain...
  • Page 45 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts Fence...
  • Page 46 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts Stand & Motor...
  • Page 47 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 000104-104 CAP SCREW M8-1.25X16 006305-100 LOCK WASHER 8.2-13.7 174706-008 FENCE COVER 000804-101 ROUND HEAD HEX SCREW M5-0.8X8 250683-615 KNOB 361438-904 HANDLE ROD 361439-902 SWING AXIS 011003-104 SPRING PIN 5X25...
  • Page 48 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 174622-904 TILT PLATE 000003-108 HEX SCREW M8*1.25P*40 008006-100 HEX NUT M8-1.25P(13BX6.5H) 174956-904 SAFETY PLATE 000104-110 CAP SCREW M8-1.25X30 006001-009 FLAT WASHER 5.2-10X1.0 361367-902 CONNECT ROD 250602-621 FRICTION PLATE 310522-911...
  • Page 49 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 290028-901 SHOULDER SCREW 174655-902 FIXING PLATE 009103-100 LOCK NUT 1/4-20(11BX8H) 000702-104 FLAT HD. SOC. SCREW M6-1.0X16 280082-000 TENSION SPRING 000102-116 CAP SCREW M5*0.8P*15 174644-196 FRONT COVER - L 174643-196 FRONT COVER - R 230156-615...
  • Page 50 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 000801-101 ROUND HEAD HEX SCREW M6-1.0X10 174518-902 PACKING 006004-070 FLAT WASHER 10-22X0.8 008308-100 LOCK NUT M10-1.5P(17BX12H) 381469-902 FIXING BOLT 051407-902 LEAD SCREW BRACKET 320413-000 GEAR 320397-000 GEAR 000103-103...
  • Page 51 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 491128-000 SENSOR WR5501 174611-008 DUST COVER 000102-101 CAP SCREW M5-0.8X6 021801-000 EASY FIT GROMMET NB-1722 006001-131 FLAT WASHER 5.3-10X2.0 006001-181 FLAT WASHER 5-16X3.0 950785-001 MAGNETIC RULER ASSEMBLY 3/4"...
  • Page 52 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 006308-100 LOCK WASHER 12.2-21.6 006001-136 FLAT WASHER 12.2-23X2.0 000104-117 CAP SCREW M8-1.25X70 006001-054 FLAT WASHER 8.5-20X2.0 381391-308 BRACKET FOR POWER FEEDER 000403-104 FLAT HEAD PHILLIPS SCREW M6-1.0X20 170479-196 COVER...
  • Page 53 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 244.6 474005-015 CONNECT CORD SJT 10AWG/4CX1000MM 244.7 474005-016 CONNECT CORD SJT 10AWG/4CX760MM 244.8 475001-007 CONNECT CORD SJT 18AWG/5CX1550MM 244.9 472001-050 CONNECT CORD SJT 18AWG/2CX2000MM 000303-104 PAN HEAD SCREW M5-0.8X12 250573-615...
  • Page 54 JX|12 & JX|16 Sheartec:II Jointers \ JX16 Sheartec:II Parts REF NO PART NUMBER DESCRIPTION SPECIFICATION 002401-101 ROUND HEAD PHILLIPS SCREW M4*-.7X12/4X10X0.8 W/WASHER 174955-904 FIXING BRAKE PLATE 010003-000 RETAINING RING STW-12...

  • Page 55: Warranty

    This machine is covered by a warranty and the purchasing dealer can answer any questions you may have. Additionally, you can contact Laguna: +1 (949) 474-1200 customerservice@lagunatools.com. Every product sold is warranted to be free of manufacturers’ defective workmanship, parts, and materials.
  • Page 56 Minnesota: 5250 West 74th St, Edina, MN 55439, U.S.A Phone: +1-949-474-1200 DAKE CORPORATION 724 Robbins Road, Grand Haven, MI 49417, United States +1-800-937-3253 LAGUNA EUROPE Walker Rd, Bardon Hill, Coalville LE67 1TU, United Kingdom. Phone: +44-1530-516921 © 2021 Laguna Tools...

This manual is also suitable for:

Jx16 sheartec:iiMj12x88p-0130Mj16x100p-0130Sheartecii jx|12

Table of Contents