EN
BO600EVO - BO900EVO - P300EVO - P600EVO
5] WIRING AND INSTALLATION
Follow the 3-Step installation instructions of the architetucral handle below
Cover
When installing the wall support, it is important to properly
engage the plastic caps of the PCB board to the wall support.
Step 1,
Prepare the frame and wiring.
Step 2,
Installation of the maglock support on the doorframe.
Cable the cable to the PCB.
Connection of the electromagnetic lock (see page 10).
Clip the cover on the wall support.
The terminal block housings and the PCB board can be screwed (self-drilling
screws supplied) on the wall support, be aware to not damage the cable.
Translucent cover
from the handle
Architectural handles
Translucent cover
from PCB board
9