Appendix A Ntcs04 Termination Unit; Introduction - ABB Symphony Harmony Series Instruction

NTCS04 Termination Unit

Introduction

WBPEEUI240769B0
The IMCIS22 module and IMQRS22 module use a NTCS04 ter-
mination unit for termination. The NTCS04 termination unit
can handle four analog inputs, two analog outputs, three digi-
tal inputs and four digital outputs. Dipshunts on the termina-
tion unit configure the I/O module.
NOTE: There is no dipshunt socket to configure for the digital outputs on the
NTCS04 termination unit.
Figure A-1 shows the NTCS04 termination unit configuration
sockets (dipshunts). Refer to this figure when connecting field
wiring to the NTCS04 termination unit. Figure
standard dipshunt with jumper positions for switching hot
and switching neutral. Refer to Tables
determine the dipshunt strapping.
Appendix A
A-2 shows a
A-1 through A-4 to
A - 1