Philips 8000 Series Manual page 9

Hide thumbs Also See for 8000 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
On
On
MAX
MAX
MAX
MAX
setting the temperature
1
Put the mains plug in an earthed wall socket and press the on/off
button once.
The power-on light goes on.
The display lights up and you will hear a short beep. The following
,
message moves across the display:
'WELCOME TO PHILIPS - CHECKING SENSORS - CHECKING WATER
- WARMING UP'.
The steam light on the steam tank starts blinking.
,
After approx. 2 minutes the steam light stays on continuously to indicate
that the steam tank is ready for steam ironing.
When you switch the appliance on, it will automatically heat up to
,
the last used temperature setting.

Check the garment label for the required ironing temperature.

Press the temperature button + or - (hotter or colder) to set the
required ironing temperature or fabric type.
The display shows the fabric type for which the selectedtemperature
,
setting is most suitable (see chapter 'Iron display guide').
The display indicates that the iron is heating up or cooling down to
,
the selected temperature.
A double beep and a message on the display indicate that the soleplate has
reached the selected temperature.
tips
-
If the article consists of various kind of fibres, always select the
temperature required by the most delicate fibre, i.e. the lowest
temperature. If, for example, the fabric consists of 60% polyester and
40% cotton, it should be ironed at the temperature indicated for
polyester (2).
-
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that will not
be visible when you wear or use the article.
-
Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches.
-
Fabrics that tend to acquire shiny patches should be ironed in one
direction only (along with the nap) while applying very little pressure.
-
Start ironing the articles that require the lowest ironing temperature,
i.e. those made of synthetic materials.
To make the iron cool down faster, simply apply steam or iron a
,
piece of cloth.
EnGlish
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc8280

Table of Contents