Download Print this page

Advertisement

Quick Links

Identitifying the parts

A
Programming button
B
Programming led
C
KNX connector

Rear

Before operating the unit, please read this manual thoroughly and retain it for
future reference.
Model No. 180-02
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Caution: The device could become damaged.
Never connect the device to 230V!
Caution: The device may only be installed and connected by professional
electricians. Observe the regulations valid in the country of use, as well as valid
KNX guidelines.
A
B
C
Auro KNX
Installation Manual
basalte is a registered trademark of Basalte bvba.
Auro is a registered design of Basalte bvba.
KNX is a registered trademark of the KNX organisation.
004-010-01 v1.0 © 2010 basalte

Advertisement

loading
Need help?

Need help?

Do you have a question about the Auro and is the answer not in the manual?

Questions and answers

Summary of Contents for Basalte Auro

  • Page 1 Identitifying the parts Programming button Programming led KNX connector Rear basalte is a registered trademark of Basalte bvba. Auro is a registered design of Basalte bvba. KNX is a registered trademark of the KNX organisation. 004-010-01 v1.0 © 2010 basalte...
  • Page 2 Auro is intended for ceiling mounting. In order to install Auro, an opening should be made with a diameter of 43mm. Auro has a horizontal detection angle of 360° and a vertical detection angle of 90°. Installed at a height of 2.5m, Auro will have a circular detection field with a diameter of 5m.

This manual is also suitable for:

180-02