Biostar M7TDB User Manual page 42

Chapter 2
Set User Password
If the Supervisor Password is not set, then the User Password will function in the
same way as the Supervisor Password.
the User Password is set, the "User" will only be able to view configurations but
will not be able to change them.
Save & Exit Setup
Save all configuration
confirmation message will be displayed before proceeding.
Exit Without Saving
Abandon all changes made during the current session and exit setup.
confirmation message will be displayed before proceeding.
If the Supervisor Password is set and
changes to CMOS(memory)
2-5
BIOS Setup
and exit setup.