East Coast Gate Operators ECGO-GKP Instructions Manual page 9

Programming the owner to receive incoming and outgoing reports Via Text message
1 st step Example *12*1234#84(1)# then send
secs )
2 nd step the mobile number report gets sent to *12*1234#85(mobile number)# then
send wait till ok back
3 rd step the number of the sim card used in the ECGO-GKP *12*1234#86(sim card
phone number in the unit) #
To delete the mobile number where log is sent *12*1234#85*#
To delete the sims card number in the unit
001@15/04/25 (year/month/day) 13:12:45 ( 12 min 45 seconds after 1.pm) I-
Push Reset Button and Hold Jump PB and GND you will hear "DOU" Tones
Power (up to 10 secs) remove Jumper. Returns unit back to factory default
(This is only needed if you loose your passwords or codes )
0= no sending report (default from factory)
1= sending report Via text message
then send
To retrieve and check log send a text to
Replied log information
7047869815 (number of person whom came in )
002@15/04/25,13:12:45-I-7047869815
Hard Reset (for restoring unit to Factory )
wait till ok back (may take 10—40
*12*1234#86*#
Your unit
*44*1234#
Example
Page 9