Biostar M7TTB User Manual page 53

Chapter 2
Use IR Pins
Consult your IR peripheral documentation to select the correct setting
of the TxD and RxD signals.
The Choices: IR-Rx2Tx2 (default), RxD2 TxD2.
Onboard Parallel Port
This item allows you to determine access onboard parallel port
controller with which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default is SPP.
SPP (default)
EPP
ECP
ECP+EPP
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The Choices: EPP1.7 (default), EPP1.9.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Game Port Address
Game Port I/O Address
The Choices: 201 (default), 209, Disabled.
Midi Port Address
Midi Port Base I/O Address.
The Choices: 330 (default), 300, 290, Disabled.
Midi Port IRQ
This determines the IRQ in which the Midi Port can use.
The Choices: 10 (default), 5.
Using Parallel Port as Standard Printer Port.
Using Parallel Port as Enhanced Parallel Port.
Using Parallel Port as Extended Capabilities Port.
Using Parallel Port as ECP & ECP mode.
Supports EPP or ECP mode.
2-18
BIOS Setup