Table of Contents
Advertisement
Chapter 2
MPS Version Control For OS
The BIOS supports versions 1.1 and 1.4 of the Intel multiprocessor specification.
Select the version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Small Logo(EPA) Show
This item allows you to enable/ disable display the small EPA logo.
The Choices: Enabled (default), Disabled.
Cache Setup
This item allows you to setup cache.
CPU L1 & L2 Cache
Depending on the CPU /chipset in use, you may be able to increase
memory access time with this option.
The Choices: Enabled (default), Disabled.
Boot Seq & Floppy Setup
This item allows you to setup boot seq & Floppy.
Hard Disk Boot Priority
It item allows you to select the hard disk boot priority.
The Choices: Bootable Add in cards (default).
First/ Second/ Third/ Boot Other Device
These BIOS attempt to load the operating system from the devices in
the sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1,
HDD-2, HDD-3, ZIP100, LAN, HPT370, Disabled.
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap
logical drive assignments.
The Choices: Disabled (default), Enabled.
2-11
BIOS Setup
Advertisement
Table of Contents
