Table of Contents
Advertisement
Chapter 2
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have
40 or 80 tracks. Disabling this option reduces the time it takes to
boot-up.
The Choices: Enabled (default), Disabled.
Report No FDD For WIN 95
Whether report no FDD for Win 95 or not.
The Choices: No (default), Yes.
Report No FDD For WIN 95
Whether report no FDD for Win 95 or not.
The Choices: No (default), Yes.
APIC Mode
Selecting Enabeld enables ACPI device mode reporting from the BIOS to the
operating system.
The Choices: Enabeld (default), Disabled
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Enabled, Disabled (default).
Boot Up Floppy Seek
Enabling this option will test the floppy drives to
80 tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled.
First /Second/Third/ Boot Other Device
These BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1,
determine if they have 40 or
HDD-2, HDD-3, ZIP100, LAN, HPT370,
Disabled.
2-12
BIOS Setup
Advertisement
Table of Contents
